How to sew a high waisted brief
If you have been following the’Creating SS15 collection’then this is one of the collection pieces being made. We have gone from mood boards, sketches, working drawings and patterns, Now the pieces of fabric have been cut and sewn. Crotchless TightsI have sewn the brief on a standard sewing machine – just because it’s what most people will have to start out.
G Strings and fabric cut ready to go.
A reminder of the shape of the brief:
The legs and waist will have fold over elastic, which is as it sounds, elastic that fold over the front of the fabric and back, it’s great for creating a clean finish. Also as I am only using a sewing machine and not an overlocker, I have to think about the internal seams. Traditionallyfrench seamsare used on delicate fabric to enclose your raw edge. If Waterproof Vibrators are planning to use a french seam remember to add the seam allowance into the pattern. As I am wanting to create a control brief look, I’m going to make the seams a detail, so have bias cut binding in which I am going to enclose the seam, then turn to the side and sew down so it looks like the seam has been taped.
To begin with I always create the front panel, if you always follow a structure of your sewing it’s easier to keep track if you have many pieces.
SEWING THE BINDING TO ENCLOSE THE SEAM
Once Bridal Lingerie are attached, next the gusset is sewn on. If you’re making your briefs on a domestic sewing machine only and no overlocker, then have the gusset in two pieces the outer gusset which is part of the front and the inner gusset which is the gusset part, this means that you can hide, both the front and back seam.
Shown in the picture, the top layer of fabric is the front of the brief, the second layer is the back of the brief, and the bottom is the gusset.
SEWING THE GUSSET
To create the hidden gusset seam, you need to twist the inner gusset and sew to the back gusset, so when straightened the gusset lies flat and seam is hidden.
Next sew the back side seams like the front and then the whole brief is complete. I usually sew the full brief first then apply the elastics and over lap the ends and then sew down the overlap of the elastic to secure.
The elastic to the legs and waist are attached by x/stitch, starting at the back seam. Sexy Plus Size Clubwear finished brief below.
FINAL FRONT OF HIGH WAIST BRIEF
WHAT I WOULD CHANGE
Having sketched out the pattern freehand, there are usually alterations to make after the first toile. What i would change for the next fit and toile, would be lighter elastic, the elastic was too strong for the legs, you can see this on the back brief picture just up from the gusset, as they are not lying completely flat. Also because the elastic is quite heavy you can see the join.
Having tried them on, I would take 3 cm off the back side panel and add it to the back centre panel. This will allow for a better stretch around the body, and will have better hanger appeal, as the front seam will then be in line with the back seam.
Sign up to receive the latest news and discounts
Thank you for signing up, a newsletter will go out monthly, if you find the content no longer relevant then please just unsubscribe.
FAQ-PRIVACY-CONTACT-WHAT’S YOUR NEXT STEP-DELIVERY-MEDIA-EUROPEAN DOWNLOADS-PAST WORK
Copyright © 2014 Van Jonsson Design . All Rights Reserved.